Skip to content
Serving Reseda and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (213) 401-2183

Heating Repair in Santa Monica, CA

Serving Santa Monica and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (213) 401-2183

The short answer

Ventora HVAC Repair Service repairs gas furnaces and heat pumps in Santa Monica homes in ZIP codes 90401 through 90405. We diagnose the real cause, check gas systems for safety problems, and give you clear repair-or-replace options before any work starts.

Santa Monica winters are mild, so a furnace or heat pump can sit idle for months and then get switched on during a damp, chilly evening. That is often when problems show up: a burner that won't light, a blower pushing cool air, or a heat pump stuck in the wrong mode. Ventora HVAC Repair Service sends technicians from our base in Reseda, about 12 miles away, to homes across Santa Monica. We find the actual cause, explain what we found in plain terms, and repair what can reasonably be repaired.

Why Heating Systems Act Up in Santa Monica

The coastal climate keeps winter temperatures mild, so many Santa Monica households run the heat only a few weeks a year. Equipment that sits unused collects dust on burners and flame sensors. Filters get forgotten, and small issues go unnoticed until the first cold night. Near the ocean, damp, salty air can also be hard on outdoor heat pump units and exposed metal parts, so these are worth keeping an eye on.

Location inside the home matters too. Systems tucked into closets, attics or tight utility spaces are harder to reach and easy to overlook, so a problem may have been building for a while before anyone notices it.

  • Furnace clicks or tries to start but never lights
  • Blower runs but the air from the vents is cool
  • Heat comes on, then shuts off after a few minutes
  • A burning-dust smell that doesn't fade after the first run of the season
  • Rattling, squealing or banging from the unit or ductwork
  • Heat pump blowing cold air in heat mode, or frost on the outdoor unit that won't clear
  • Thermostat calls for heat but nothing happens

What Happens During a Heating Repair Visit

We start by asking what you've noticed and when it started. Then we check the system from the thermostat to the equipment. The goal is to find the cause, not just reset the system so it limps along until the next cold snap.

If we can't finish the repair on the first visit, for example because a part has to be ordered, we'll tell you plainly. We'll also make sure the system is left in a safe state.

  • Confirm thermostat settings, wiring and power to the unit
  • Inspect the filter, blower and airflow through the supply and return vents
  • On gas furnaces, check the ignition, flame sensor, gas valve and safety switches
  • On heat pumps, check heating performance, defrost operation and the outdoor coil
  • Look for signs of venting or combustion problems
  • Explain what failed, what the repair involves and your options before we begin

Gas Furnace Safety Comes First

On a gas heating system, every repair is also a safety check. We look for signs of a cracked heat exchanger, a blocked flue or poor combustion. If we find one, we'll explain the risk, and we may need to shut the unit off until it's corrected. A short time without heat is better than a system that could put carbon monoxide into your home.

Keep working carbon monoxide alarms in your home. If an alarm goes off or you smell gas, leave the house first. Then call your gas utility or 911 before calling us.

Thinking About Replacing Instead of Repairing

Sometimes a repair doesn't make sense, especially on an older system with a failing heat exchanger or repeated breakdowns. If you're considering replacement, a few local rules and programs affect the decision.

  • Gas furnaces: South Coast AQMD Rule 1111 limits NOx emissions from natural-gas central furnaces sold and installed in this region. The district has been amending the rule toward zero-emission requirements and sets and revises the compliance dates, so check the current rule before planning a new furnace.
  • Your utility determines which rebates you can get. Santa Monica is outside the City of Los Angeles, and many homes outside the city are served by Southern California Edison rather than LADWP. We confirm which utility serves your address and what offer is current before we quote it.
  • LADWP residential electric customers can apply for Consumer Rebate Program rebates on qualifying heat pump systems. The amount depends on the unit's SEER2/HSPF2 rating. You file the application after the equipment is purchased and installed, within 12 months of purchase.
  • The federal 25C tax credit covered qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations after that date.

Serving Santa Monica and Nearby Communities

We handle heating repair throughout Santa Monica, including ZIP codes 90401, 90402, 90403, 90404 and 90405. Our technicians also work in nearby Los Angeles, Culver City, Beverly Hills, West Hollywood and Calabasas, along with other parts of Los Angeles County.

More services in Santa Monica

Related

What to expect

How a visit goes

  1. Find the cause first

    We test the system and track down what is actually wrong before suggesting parts or replacements, so you know what you are paying to fix.

  2. Explain your options

    We tell you what we found, what each option involves, and when a repair is reasonable versus when replacement deserves a closer look. The decision is yours.

  3. Check local rules and rebates

    Furnace rules and utility rebates in the Los Angeles area change and depend on your address. We confirm what currently applies to your home before we bring it up.

FAQ

Common questions

Why does my heater smell like burning when I first turn it on?

Dust settles on the burners and heat exchanger while the system sits unused. A mild burning-dust smell for the first few minutes of the season is common. If the smell lasts, gets stronger or smells like gas, turn the system off and have it checked. If you smell gas, leave the house before calling.

My heat pump is blowing cold air. Is it broken?

Not always. Heat pumps run short defrost cycles that can briefly send cooler air through the vents. If the air stays cold, the outdoor unit stays iced over, or the system never seems to switch into heating, it needs a diagnosis.

Do you repair heating systems in all Santa Monica ZIP codes?

Yes. We serve homes in 90401, 90402, 90403, 90404 and 90405, as well as nearby Los Angeles, Culver City, Beverly Hills, West Hollywood and Calabasas.

Can I get a rebate if I replace my furnace with a heat pump?

It depends on the utility that serves your address. LADWP customers can apply for rebates on qualifying heat pumps, but many homes outside the City of Los Angeles are served by Southern California Edison instead. We confirm the current offer for your address before quoting it.

Is the federal heat pump tax credit still available?

No. The federal 25C credit applied to qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations after that date.

Can I simply replace my old gas furnace with a new one?

Check the current rules first. South Coast AQMD Rule 1111 limits NOx emissions from natural-gas central furnaces sold and installed in this region, and the district has been moving it toward zero-emission requirements. We can walk you through repair and replacement options for your home.

Tell Us What Your System Is Doing

Whether your AC is blowing warm air, your furnace won't start, or you are thinking about a heat pump, reach out to Ventora HVAC Repair Service. We will diagnose the problem and walk you through your options.

Call (213) 401-2183 Request Service