Skip to content
Serving Reseda and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (213) 401-2183

Heating Repair in Calabasas, CA

Serving Calabasas and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (213) 401-2183

The short answer

Ventora HVAC Repair Service repairs gas furnaces, heat pumps and thermostats for Calabasas homes in the 91302 ZIP code. We diagnose the actual cause and explain your options before any work starts. If replacement comes up, we cover the furnace emission rules and utility rebates that apply to your address.

Heating systems in Calabasas often sit idle for months, then get asked to work hard on the first cold nights of the season. That on-and-off pattern is when problems show up: a furnace that won't light, a heat pump blowing cool air, or a thermostat that calls for heat and gets nothing back. Ventora HVAC Repair Service works out of Reseda, about 9 miles northeast of Calabasas, and repairs gas furnaces, heat pumps and their controls for homes in the 91302 ZIP code. Our goal on every visit is to find the actual cause, explain it plainly and fix it without upselling you equipment you don't need.

Heating problems we see in Calabasas homes

Los Angeles has mild winters, so many furnaces and heat pumps go unused from spring through fall. Dust settles on burners and sensors, filters get forgotten, and small electrical problems go unnoticed until the system is needed. Fall Santa Ana winds can also push extra dust and debris toward outdoor units and return vents.

Most of the calls we get come down to a short list of symptoms:

  • Furnace won't ignite, or lights and then shuts off after a few seconds
  • Heat pump runs but blows lukewarm or cool air
  • Burning or dusty smell that doesn't fade after the first few minutes of a cycle
  • Short cycling, where the system turns on and off every few minutes
  • Rooms upstairs or at the far end of the house staying much colder than the rest
  • Thermostat that is blank, unresponsive or out of sync with the actual room temperature
  • Unusual noises such as banging at startup, squealing or grinding

What happens during a heating repair visit

We start by asking what you've noticed and when it started, because details like "it worked fine until the power flickered" can save diagnostic time. Then we check the system in order: thermostat and wiring, power and safety switches, filter and airflow, ignition and flame sensing on gas furnaces, or refrigerant-side and defrost operation on heat pumps.

Once we find the cause, we tell you what failed, why it matters and what the repair involves. You decide whether to go ahead before any work begins. If we notice something that isn't urgent, such as a worn part that still has some life left, we'll mention it separately so you can plan for it instead of feeling pressured into it.

Gas furnace and heat pump repairs

Gas furnace repairs often involve the ignition system, flame sensor, pressure switch, inducer motor or blower motor. Because a furnace burns fuel inside your home, we also check venting and look for signs of incomplete combustion. If anything points to a safety concern, we'll explain it and recommend shutting the unit down until it's corrected.

Heat pumps handle both heating and cooling, so a heating problem can also affect summer comfort. Common causes include a stuck reversing valve, defrost control faults, low refrigerant from a leak, failed capacitors and dirty outdoor coils. Repairing the root cause now usually means the system is ready for hot summer days too.

When repair isn't the right answer

Most heating problems are worth repairing. But if a system is failing repeatedly, needs a major component, or has a safety issue that can't be corrected economically, replacement may make more sense. We'll give you an honest read either way.

If you're weighing a new gas furnace, note that South Coast AQMD Rule 1111 limits NOx emissions from fan-type central furnaces sold and installed in this region, and the district has been amending it toward zero-emission requirements. The district sets and revises compliance dates, so check the current rule before choosing equipment.

If a heat pump is on the table, rebates depend on which utility serves your home. Many homes outside the City of Los Angeles are served by Southern California Edison rather than LADWP, so we confirm the current offer for your address before quoting it. The federal 25C tax credit for heat pumps is not available for systems installed after December 31, 2025.

Serving Calabasas and nearby communities

Calabasas is a short drive from our Reseda base, so we can schedule heating repair visits throughout the 91302 area. We also work in Hidden Hills, Agoura Hills, Simi Valley, Santa Monica and Beverly Hills. Before the first cold nights, it helps to replace the filter, clear space around the furnace or outdoor unit, and run the heat briefly to confirm it works. That way you can call while the weather is still mild instead of waiting until the house is cold.

More services in Calabasas

Related

What to expect

How a visit goes

  1. Find the cause first

    We test the system and track down what is actually wrong before suggesting parts or replacements, so you know what you are paying to fix.

  2. Explain your options

    We tell you what we found, what each option involves, and when a repair is reasonable versus when replacement deserves a closer look. The decision is yours.

  3. Check local rules and rebates

    Furnace rules and utility rebates in the Los Angeles area change and depend on your address. We confirm what currently applies to your home before we bring it up.

FAQ

Common questions

Why does my furnace smell like burning dust when I first turn it on?

Dust that settled on the burners and heat exchanger during the off months burns off at startup. A light smell that fades within a few minutes is normal. If it lingers, smells electrical, or comes with smoke, turn the system off and have it inspected.

My heat pump is blowing cool air. Is it broken?

Not necessarily. Heat pumps deliver air that feels cooler than a gas furnace, and they briefly run defrost cycles. If the air stays cool and the house won't warm up, the cause could be a reversing valve, defrost control, refrigerant leak or thermostat setting, and it should be checked.

Should I repair or replace an older furnace?

It depends on the failed part, the unit's overall condition and any safety issues. We explain the repair and whether replacement is worth considering. If you replace a gas furnace, check the current South Coast AQMD Rule 1111 requirements first.

Are there rebates for a heat pump in Calabasas?

It depends on the utility serving your home. LADWP offers heat pump rebates to its residential customers, but many homes outside the City of Los Angeles are served by Southern California Edison. We confirm the current offer for your address before quoting it.

Can I still get the federal tax credit for a new heat pump?

No. The federal Energy Efficient Home Improvement Credit (25C) covered qualifying heat pumps placed in service before December 31, 2025. It is not available for new installations after that date.

What can I check before calling for heating repair?

Confirm the thermostat is set to heat and has power, check that the breaker hasn't tripped, make sure the furnace door is closed securely, and replace a dirty filter. If the system still won't heat, call us rather than opening panels or resetting it repeatedly.

Tell Us What Your System Is Doing

Whether your AC is blowing warm air, your furnace won't start, or you are thinking about a heat pump, reach out to Ventora HVAC Repair Service. We will diagnose the problem and walk you through your options.

Call (213) 401-2183 Request Service